196cc Horizontal Engine
When you need reliable power for small engine applications, Champion’s got you covered with the 196cc Replacement Engine. With a 0.9-gallon fuel tank and 0.6-quart oil capacity, this engine features a low oil shut-off sensor, a smooth pull start and has an OHV design for clean operation.
Smooth Pull Start
The automatic compression release allows for low effort recoil starts
4-stroke durable OHV design for clean and cool operation, produces a max torque of 8.1 lb-ft at 2800 RPM
The 196cc engine has a cast iron sleeve and a ball bearing supported crankshaft
EPA certified and 50-state CARB compliant with automatic low oil shut-off sensor
Champion Support includes 2-year limited warranty with FREE lifetime technical support from dedicated experts
The Champion Power Equipment 100220 196cc General Purpose Replacement Engine is designed to provide reliable power for most small engine applications. Whether you need to replace the engine in your pressure washer, compressor, cement mixer, snow blower, log splitter, transfer pump, chipper shredder or other application, you can count on a Champion replacement engine to power your life.
This small but mighty engine comes with a 0.9-gallon fuel tank and a 0.6-quart oil capacity (recommended 10W-30).
Producing a max torque of 8.1 lb-ft (11 Nm) at 2800 RPM, the 4-stroke, single cylinder OHV engine has a straight crankshaft with a 3/4-inch diameter, a 5/16-inch- 24 UNF threaded end hole, a 3/16-inch keyway, a 2.56-inch square (5/16-inch - 24 UNF) shaft mount bolt pattern, a 4.17-inch PTO height, and counterclockwise rotation.
Champion’s reliable and durable engine also features an adjustable throttle, plus this engine is designed for safety with the fuel shut-off valve and automatic low oil shut-off sensor.
Buy this EPA certified and CARB compliant engine with confidence – Champion Support and our nationwide network of service centers will back up your purchase with a 2-year limited warranty and FREE lifetime technical support.
- Oil Funnel
|Gasoline Capacity||0.9 gal.|
|Engine Oil Type||10W-30|
|Engine Oil Capacity||0.6 qt.|
|Engine Oil Included||No|
|Low Oil Shut-Off||Yes|
|Crankshaft Diameter||3/4 in.|
|Crankshaft End Tapped Size||5/16-24 in-UNF|
|Shaft Keyway Width||3/16 in.|
|PTO Height||4-11/64 in.|
|Maximum Torque||8.1 lb-ft|